Fixed Input Push-Pull Driver Controller with Highly Symmetrical Power MOSFETs and Under Voltage Protection

Published  February 18, 2022   0
L Lakshita
Author
Fixed Input Push-Pull Driver Controller SCM1201BTA and SCM1212BTA

MORNSUN has introduced two new drivers SCM1201BTA and SCM1212BTA that feature integrated MOSFETs for the primary side of a push-pull power and can be used in the 1-2W applications with 3.3V and 5V inputs. These new series with wide input voltage range of 2.7-5.5V will not be damaged even under the high input voltage up to 9V within 1s.

These devices contain, two drive systems and two power MOSFETs that are highly symmetrical and reduce the degree of magnetic bias in the push-pull topology. Moreover, these drivers are integrated with three key technologies to improve reliability meet the AEC-Q100 automobile standard to ensure reliability.

Key Features

  • Push-Pull driver controller
  • 2.7-5.5V wide input voltage
  • Low conduction resistance 200mΩ
  • Two built-in power MOSFETs with high symmetry, quasi-complementary driver
  • Limited MOSFET’s current while turning on the power
  • Over current protection and short circuit protection
  • Over temperature protection
  • Under voltage protection
  • Increase the dead time under light load
  • Meet AEC-Q100 automobile standard

These devices can be widely used in isolated power supply, industrial process control, isolated communication power supply, medical device, telecommunication equipment, etc.