Maxim Power Management ICs Drive Optimized Power for Automotive ADAS Functions

Published  July 18, 2018   0
S Staff
Author
Power Management ICs Drive Optimized Power for Automotive ADAS Functions

Power-management ICs offer high performance, small size, efficiency, and protection needed by advanced auto subsystems

With a series of power management ICs (PMICs) from Maxim Integrated, designers can optimize power for automotive advanced driver-assistance systems (ADAS) functions to achieve high performance, small size, efficiency, and electrical protection.

 

ADAS functions, many of which are now mandatory or will be soon, increase vehicle safety and enhance the driving experience. These features include smart braking for collision avoidance, GPS/navigation, adaptive cruise control, lane centering, lane-departure warning, and back-up/surround video. Although these functions receive considerable design attention, managing DC power in electrically harsh vehicle environments is a less-publicized yet critical challenge for ADAS system designers.

 

Maxim’s array of application-optimized ICs regulates, manage and protect DC power. These products solve critical problems for ADAS systems designers by offering a unique combination of package size, high operating efficiency, low quiescent current, integrated ASIL-B/D electrical protection and reduced EMI.

 

The series of PMICs which Maxim has released include:

MAX20019 Dual Synchronous Step-Down Converter – Provides 3.2MHz dual step-down power supply in a 2mm × 3mm package size.

MAX20087 Quad Camera Power Protector – ASIL-B/D grade camera module protector IC includes an I2C interface to report on overvoltage/undervoltage/fault conditions; monitors up to four 600mA coax channels and isolates faults from individual camera modules

MAX20075 and MAX20076 Step-Down Converters – Offers the lower quiescent current with peak and valley mode options; provides a high peak efficiency of 91% for always-on applications compared to competing solutions, while featuring a 40-V load-dump tolerance

MAX20014 Triple-Output Converter – Features one synchronous boost and two synchronous step-down converters for smaller, simpler, and lower cost designs; features 2.2MHz switching frequency and spread-spectrum capability for reduced EMI and comes in a small 4mm x 4mm package size