Amid the growing concerns towards air pollution the emission standards for vehicles are becoming increasingly demanding. To match with these standards, the car manufacturers are striving to make combustion engines more efficient. A new FLEX multichannel low-side switch is launched by Infineon Technologies to reduce fuel consumption and thus CO 2 emissions in vehicles. The TLE9104SH is the first smart four-channel low-side switch for currents up to 5A DC in 12V systems, which allows controlling actuators such as high-precision port fuel injectors, high-energy valves or high-current relays in engine management, transmission control and battery management systems.
With an R DS(on) of 300mΩ at 150°C, TLE9104SH comes in a new cost and size optimized DSO-20 package (PG-DSO-20-88) with a footprint area of about 80mm². It comes with a 16-bit Serial Peripheral Interface (SPI) for control and diagnosis. All channels are protected against over-current/temperature and enhanced with an active clamping circuitry for driving inductive loads. Load status detection is possible over the SPI for: Short to Ground (SCG), Open Load (OL), and Short to Battery (SCB). Four input pins are available for direct control of the switches.
Safety features include an extra output enable pin, SPI communication watchdog and output stage status information available via SPI. This makes the product an ideal fit to safety critical automotive and industrial applications.
To support design activities, Infineon provides a development board with TLE9104SH in the Arduino form factor, which can be used in two kinds of evaluation setups. The TLE9104SH shield can easily be used either in combination with the XMC1100 Boot Kit (Version S) or in combination with the AURIX™ TC277 Evaluation Board (TriBoard) with the help of an additional Multichannel Connection PCB (Version L).
